人人超碰人人爱超碰国产

<dd id="gmdqn"><track id="gmdqn"></track></dd>

<rp id="gmdqn"></rp>
<dd id="gmdqn"></dd>
<th id="gmdqn"></th>

<progress id="gmdqn"></progress>
<th id="gmdqn"></th>

Your location:Product
DIAPHRAGM WALL CUTTERS
  • Diaphragm Wall Cutting Tools
  • Important distinguishing characteristics of HaoQuan  Diaphragm Wall Cutting teeth
    1.high wear resistance and efficiency due to optimized tungsten carbide geometry
    2.tungsten carbide inserts made of high quality materials
    3.high grade of soldering between tungsten carbide inserts and holder
    4.secure fitting due to tight tolerances of the tooth holder
    5.cutting teeth are easily replaced or exchanged because of the tensioning pin design
    6.tooth holders are protected against wear because they fit within the outer surfaces of the mounting
    7.A large variety of the cutting teeth enable standard cutting wheels to be optimized for different soil conditions

    ==========================================================================================================

    These cutting teeth are suitable for excavating homogenous and sandy soil as well as clay, cobbles (max. diameter 50
    mm), sandstone, weathered rock and hard rock. The RD and LD types are mounted at the outer edges of the cutting
    wheels to ensure the necessary over-cut.

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    The cutting tooth  is suitable for excavating clay, cobbles (diameter greater than 50 mm), sand, weathered rock and hard rock. The tungsten carbide of the The JL and JR Type are mounted at the outer edges of the cutting wheels to ensure thenecessary over-cut. The tungsten carbide is hard and tough.

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

     

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Round Shank Tools

    1.high wear resistance and efficiency and life due to the optimized that facilitates rotation
    2.tungsten carbide inserts made of high quality materials
    3. high grade of soldering between tungsten carbide and holder
    4.secure fitting due to tolerances in the bushing
    5. round shank tools are easily replaced or exchanged because of a special groove designed into the tooth
    6.good wear protection of the tooth holders due to wide flanges on the round shank chisels. All exposed surfaces are
    studded with tungsten carbide inserts.
    7.Round shank tools are suitable for excavation of sand, cobbles, weathered rock and hard rock 
    8.Because of the smaller diameter of the tungsten carbide insert the tooth has a higher penetrating power.

     -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

     

                              

     

? 2004-2016 Copyright??YangGu HaoQuan Rock Tools Co.,Ltd.
魯ICP備06008994號-1   www.kex3.com
人人超碰人人爱超碰国产
<dd id="gmdqn"><track id="gmdqn"></track></dd>

<rp id="gmdqn"></rp>
<dd id="gmdqn"></dd>
<th id="gmdqn"></th>

<progress id="gmdqn"></progress>
<th id="gmdqn"></th>